B&G Vulcan Series, Руководство оператора

Страница: 53 / 198

Autorouting and Easy Routing
The Autorouting and Easy Routing suggest new routepoint
positions based on information in the map and on your boat's size.
Before you can start using this feature the boat draught, width and
height must be entered into the system. The boat settings dialog is
automatically displayed if the information is missing when you start
the feature.
Ú
Note:
It is not possible to start the Autorouting or Easy Routing
if one of the selected routepoints is located in an unsafe area. A
warning dialog is displayed, and you have to move the relevant
routepoint(s) to a safe area to proceed.
Ú
Note:
If no compatible cartography is available, the Autorouting
or Easy Routing menu option is not available. Compatible
cartography includes C-MAP MAX-N+, Na and
Navionics Platinum. For a full selection of available charts, visit
www.gofreemarine.com, www.c-map.com or
www.navionics.com.
1.
Position at least two routepoints on a new route, or open an
existing route for editing.
2.
Select
Autorouting
, followed by:
-
Entire Route
if you want the system to add new routepoints
between the first and the last routepoint of the open route.
-
Selection
if you want to manually select the routepoints that
define the limits for the autorouting, then select the relevant
routepoints. Selected routepoints are colored red. Only two
routepoints can be selected, and the system discards any
routepoints between your selected start and end points.
3.
Select
Accept
to start the automatic routing.
- When the automatic routing is completed the route appears
in preview mode, and the legs are color coded to indicate safe
or unsafe areas. Navionics uses red (unsafe) and green (safe),
while C-MAP uses red (unsafe), yellow (dangerous) and green
(safe).
4.
Move any routepoints if required when the route is in preview
mode.
5.
Select
Keep
to accept the routepoints positions.
6.
Eventually repeat step 2 (
Selection
) and step 3 if you want the
system to automatically position routepoints for other parts of
the route.
Waypoints, Routes, and Tracks | Vulcan Series Operator Manual
53