Baldor MicroFlex e100, Руководство по установке

Страница: 12 / 172

www.baldormotion.com
2-2 Introduction MN1942
2.2 Receiving and inspection
When you receive your MicroFlex
e
100, there are several things you should do immediately:
1. Check the condition of the shipping container and report any damage immediately to the
carrier that delivered your MicroFlex
e
100.
2. Remove the MicroFlex
e
100 from the shipping container and remove all packing material.
The container and packing materials may be retained for future shipment.
3. Verify that the catalog number of the MicroFlex
e
100 you received is the same as the catalog
number listed on your purchase order. The catalog number is described in the next section.
4. Inspect the MicroFlex
e
100 for external damage during shipment and report any damage to
the carrier that delivered your MicroFlex
e
100.
5. If MicroFlex
e
100 is to be stored for several weeks before use, be sure that it is stored in a
location that conforms to the storage humidity and temperature specifications shown in
section 8.1.15.
2.2.1 Identifying the catalog number
The MicroFlex
e
100 is available with different current ratings. The catalog number is marked on
the side of the unit. It is a good idea to look for the catalog number (sometimes shown as ID/No:)
and write it in the space provided here:
Catalog number:
MFE _____________________
Installed at:
________________________
Date:
______
A description of a catalog number is shown here, using the example MFE230A003
x
:
Meaning Alternatives
MFE MicroFlex
e
100 family -
230 Requires an AC supply voltage of 115-230 Volts, 1 Φ or 3 Φ -
A003 Continuous current rating of 3 A A006 =6 A; A009 =9 A
x
A letter indicating the hardware revision.
This does not affect the capabilities of the MicroFlex
e
100
unless otherwise stated.
-