Baker Hughes Druck DPS 8000 Series Скачать руководство пользователя страница 25

Страница: 25 / 64

English–DPS 8000 Instruction Manual | 15

(PV) units. To change the relation between FV and PV, use the scale-factor objects and the zero

offset. This allows the reading of the pressure output in one of the alternative pressure units.
Example:

Set object 0x6123

01 to 100 (the scale-factor for pascal).

Figure

9: Scale of Pressure and Temperature Output

For a list of values of the alternative pressure units, refer to Appendix

B, “Alternative Pressure

Units,” on page

49.

To change the scale data for temperature use the information above but with sub-index

replacing 01.

4.8.2 0x6131

01 – The Units for the Pressure Output

Use object 0x6131

01 (Pressure Value) to change the units for the pressure output.

Example:

Set Sub-index 0x01 to 0x00220000 = CANopen value for pascal.

For a list of values of the alternative pressure units, refer to Appendix

B, “Alternative Pressure

Units,” on page

49.

4.8.3 0x6148 – The Local Limits (Minimum Pressure and Temperature)

Use object 0x6148 (Span Start – FP) to set the local limits for the pressure transducer operation.

Set the applicable minimum values for the pressure and temperature. Refer to “0x2007 – The

Count: Pressure is Less than the Limit” on page

16 and “0x2009 – The Count: Temperature is

Less than the Limit” on page

17.

4.8.4 0x6149 – The Local Limits (Maximum Pressure and Temperature)

Use object 0x6149 (Span End – FP) to set the local limits for the pressure transducer operation.

Set the applicable maximum values for the pressure and temperature. Refer to “0x2006 – The

Count: Pressure is More than the Limit” on page

16 and “0x2008 – The Count: Temperature is

More than the Limit” on page

16.

•

Sub-index

01 sets the pressure.

•

Sub-index

02 sets the temperature limit.

4.9 To Monitor the Operation – Objects: 0x1000

–

0x1FFFF

4.9.1 0x1001 – The Status of the Unit

Use object 0x1001 (Error Register) to monitor the current status of the unit. Also see “0x6150 –

The Pressure and Temperature Status” on page

17.

Object 0x6100 01
Pressure Value

Field Value X
(mbar)

Object 0x6130 01
Pressure Value

Process Value Y
(pascal)

Содержание Druck DPS 8000 Series




























































Результаты поиска

Содержание Druck DPS 8000 Series

Отзывы:

Похожие инструкции для Druck DPS 8000 Series

Бренды по названию

Популярные бренды

Baker Hughes Druck DPS 8000 Series, Инструкция по эксплуатации

Результаты поиска

Содержание Druck DPS 8000 Series

Отзывы:

Похожие инструкции для Druck DPS 8000 Series

Бренды по названию

Популярные бренды