Baker Hughes Druck DPS 8000 Series Скачать руководство пользователя страница 21

Страница: 21 / 64

English–DPS 8000 Instruction Manual | 11

The readings can be filtered by a range of preset finite impulse response (FIR) filters. Refer to

“0x220D to 0x2218 – The Filter System” on page

14.

Use the CANopen software package to receive the PDO and get access to the CANopen Object

Dictionary.
Use the CANopen software package to change these values:
•

Values set with the Layer Setting Services (LSS).

•

Values in the CANopen Object Dictionary.

4.3 Quick Start

Get the current pressure and temperature values by using object 0x6130:
•

Sub-item

01 returns the pressure value in the default pressure units.

•

Sub-item

02 returns the temperature in degrees Celsius.

4.4 Primary Objects

The following procedures identify the primary objects that can be changed and monitored. Refer

to Appendix

A, “CANopen Object Dictionary,” on page

19 for a complete list.

4.5 To Change the Operation - Node ID and Baud Rate

Use the CANopen Layer Setting Services (LSS) to change these primary objects in the pressure

transducer:

Note:

To respond to LSS messages the pressure transducer must be in pre-operational mode.

•

The node ID (default value = 2).

•

The baud rate (default value = 250

kbits/s).

In addition, object 0x210C can be used to modify the node ID. Object 0x210D holds the baud rate.
To make changes to these and other data dictionary objects permanent, save them and cycle the

power to the sensor.
When using the LSS, the device must be identified. Object 0x1018 (identity) contains the

identification data. Refer to Appendix

C, “Bibliography,” on page

51.

4.6 To Change the Operation - Objects: 0x1000

0x1FFFF

4.6.1 0x100C to 0x100E - Error Control: Node Guarding Option

To use Node Guarding for error control, set applicable values for these objects:
•

0x100C (Guard Time).

•

0x100D (Life Time Factor).

•

0x100E (Node Guarding Identifier).

Refer to Appendix

C, “Bibliography,” on page

51.

4.6.2 0x1017 – Error Control: Heartbeat Option

To use Heartbeat for error control, set applicable values for these objects:
•

0x100E (Node Guarding Identifier).

•

0x1017 (Heartbeat Time).

Refer to Appendix

C, “Bibliography,” on page

51.

4.6.3 0x1010

01 – To Save Changes to the Data Dictionary

Use object 0x1010

01 (Store Parameter Field) to save the data dictionary to non-volatile storage.

Example:

Set the value to 0x65766173 = evas (in ASCII)

Содержание Druck DPS 8000 Series




























































Результаты поиска

Содержание Druck DPS 8000 Series

Отзывы:

Baker Hughes Druck DPS 8000 Series, Инструкция по эксплуатации, Страница: 21 / 64

Результаты поиска

Содержание Druck DPS 8000 Series

Отзывы: