Baker Hughes Druck DPS 8000 Series Скачать руководство пользователя страница 3

Страница: 3 / 64

English–DPS 8000 Instruction Manual | i

Safety

The manufacturer has designed this sensor to be safe when operated using the procedures

detailed in this manual. Do not use this sensor for any other purpose than that stated.
This publication contains operating and safety instructions that must be followed for safe

operation and to maintain the sensor in a safe condition. The safety instructions are either

warnings or cautions issued to protect the user and the equipment from injury or damage.
Use qualified

personnel and good engineering practice for all procedures in this publication.

Toxic Materials

There are no known toxic materials used in this sensor.

Maintenance

The sensor must be maintained using the manufacturer’s procedures and these should be carried

out by authorized service agents or the manufacturer’s service departments.

Druck.com

For technical advice contact the manufacturer.

Symbols

Abbreviations

The following abbreviations are used in this manual.

WARNING

Do not apply pressure greater than the maximum safe working

pressure to the sensor.

1 A qualified technician must have the necessary technical knowledge, documentation, special test

equipment and tools to carry out the required work on this equipment.

Symbol

Description

This equipment meets the requirements of all relevant European safety directives. The

equipment carries the CE mark.

This symbol, in this manual, indicates a hazardous operation.

Do not dispose of this product as household waste. Use an approved organization that

collects and/or recycles waste electrical and electronic equipment. For more information,

contact one of these:

- Our customer service department:

Druck.com

- Your local government office.

Содержание Druck DPS 8000 Series




























































Результаты поиска

Содержание Druck DPS 8000 Series

Отзывы:

Похожие инструкции для Druck DPS 8000 Series

Бренды по названию

Популярные бренды

Baker Hughes Druck DPS 8000 Series, Инструкция по эксплуатации

Результаты поиска

Содержание Druck DPS 8000 Series

Отзывы:

Похожие инструкции для Druck DPS 8000 Series

Бренды по названию

Популярные бренды