Bailey Infi 90 NIRL03, Инструкция

Страница: 29 / 39

INTRODUCTION
I-E96-415A B - 1
APPENDIX B - IISAC01 ANALOG CONTROL
STATION CONFIGURATION
INTRODUCTION
Figure B-1 shows the location of the dipswitches and jumpers
used to configure the IISAC01 Analog Control Station. Tables
B-1 through B-6 give the dipswitch and jumper settings to
configure the station. This information is provided as a quick
reference guide for personnel installing the NIRL03 termina-
tion module. Configuration consists of setting the operating
mode, communications rate and station address (dipswitch
S1). The auto bypass, output and electric drive options
(dipswitch S2), along with the bar graph display option
(dipswitches S3 and S4), must be set. Jumpers JP1 through
JP3 set the manual override, electric drive type and normal
operation options. Refer to the
IISAC01 Analog Control Sta-
tion instruction manual for detailed instructions.
Figure B-1. Analog Control Station
P3
P6
P2
S3
S4
JP1
JP2
JP3
P5
F1
P1
S1
R130
S2
T00504A
1 2 3
1 2 3
1
2
3
1 2
OPEN
3
1 2
OPEN
3
OPEN
1 2 3 4 5 6 7 8
OPEN
1 2 3 4 5 6 7 8
OPERATING MODE,
COMMUNICATION RATE AND
MODULE ADDRESS SWITCH
AUTO BYPASS, OUTPUT
AND ELECTRIC DRIVE
OPTION SWITCH
1-AMP FUSE
MANUAL OVERRIDE OPTION
JUMPER
NORMAL OPERATION
OPTION JUMPER
ELECTRIC DRIVE TYPE
OPTION JUMPER
BAR GRAPH DISPLAY
OPTION SWITCHES