REPAIR/REPLACEMENT PROCEDURES
FUSE REPLACEMENT PROCEDURES
4 - 2
I-E96-415A
®
9. Insert the replacement IRL module until it locks securely
into place.
10. Install (snap on) the front cover on the replacement IRL
module.
11. Apply power to the cabinet containing the replacement IRL
module.
FUSE REPLACEMENT PROCEDURES
If the fuse is faulty, replace it with a new one. To replace a fuse:
1. Turn off power to the cabinet containing the IRL module.
2. Remove (pull off) the front cover of the IRL module.
3. Pull the IRL module out far enough to gain access to the
fuse clips (F1 or F2).
4. Remove the faulty fuse.
5. Install the replacement fuse into the appropriate fuse clip.
6. Insert the IRL module until it locks securely into place.
7. Install (snap on) the front cover of the IRL module.
8. Apply power to the cabinet containing the IRL module.
CAUTION
It is strongly recommended that all power (cabinet, I/O, etc.) be
turned off before doing any termination module wiring. Failure
to do so could result in equipment damage. Do not apply
power until all connections are verified.
ATTENTION
Il est fortement recommand, que toutes les alimentations (arm-
oire, E/S, etc.) soient coupées avant d'effectuer quelque rac-
cord que ce soit sur un carte de raccordement. Un
manquement à ces instructions pourrait causer des dommage
à l'équipement. Ne pas rebrancher les alimentations avant
d'avoir vérifié, tous les raccordements.
