Bailey Approach Autograph Series, Руководство пользователя

Страница: 84 / 193

82
THE SEA
TTLE C
ONTR
OL P
ANEL
Mode Description
Icon Mode Description
Water Level The level in the fresh water tank is displayed as a % on the screen.
Waste Level The level in the waste water tank is displayed as a % on the screen.
Fill Internal
Tank With the external pump connected to the inlet and to an external
water source, press to fill the internal tank.
Note: When the internal tank is full, the pump will stop automatically.
External
Temperature The outside temperature, as detected by a sensor underneath the
van, is displayed on this screen. You can change between degrees
Celsius and degrees Fahrenheit by pressing ENTER and selecting UP
for °C or DOWN for °F.
Internal
Temperature The inside temperature, as detected by a sensor inside the control
panel, is displayed on this screen. You can change between °C and
degrees °F by pressing ENTER and selecting the UP button for °C or
DOWN for °F.
Select
Battery With 230V mains disconnected, the user can choose to draw power
from the leisure battery OR the vehicle battery. Press ENTER to swap
between batteries. If the “Auto-Battery” feature is enabled (see “User
Settings” section) the system will automatically switch to “Vehicle
Battery” if the “Leisure Battery Voltage” is low (less than 11V). When
230V mains is connected “Leisure Battery” is automatically selected
and cannot be changed.
Leisure
Battery
Amps This screen shows the current being drawn from your leisure battery,
in Amps, which is displayed on this screen. A higher current will drain
your battery faster.
Leisure &
Vehicle
Battery
Voltage This screen shows the voltage of the selected battery as set on the
“Select Battery” screen. If a 230V mains supply is connected then
the charging voltage of the Leisure battery will be displayed. An
estimate of your batteries’ remaining charge can be seen by pressing
ENTER then the DOWN button. 12V or less reads 0%, and 12.7V or
more reads 100%. You can return to display the voltage by pressing
ENTER then the UP button. To increase accuracy of the battery
voltage reading, switch the “Master Switch” off.
User
Settings Press the UP or DOWN button to access the User Settings screen;
refer to ‘Settings’ on page 83 for a description of each function.