Bailey Approach Autograph Series, Руководство пользователя

Страница: 75 / 193

73
THE ALDE HEA
TING S
Y
STEM
Standby Screen
The Standby Screen is displayed after the
Splash Screen. This screen contains useful
information about the status of your heating
system.
A. Clock is enabled. Day of the week and time
shown.
B. Outdoor temperature. [Optional outdoor
temperature sensor required.]
C. Room temperature. Measured at the
control panel. [Optional discrete room
temperature sensors available.]
D. Central heating circulation pump is active.
E. Delayed Start/Cycle is enabled.
F. Day Mode active.
G. Gas cylinder status. Full/empty and EisEx
mode shown. [Additional accessories
required.]
H. Night Mode active.
I. 230V supply. If not displayed, the boiler is
not receiving 230V supply.
J. Power button. Press to switch system on-
off. Lit green LED indicates system is on.
K. MENU button. Press to access Main Menu
from Standby Screen or Settings Menu.
NOTE: If the Standby Screen is set to
“Dark” in Backlight settings, the
Standby Screen will not be displayed;
the screen will be dark.
The Alde Control Panel - Controlling The
Heating System
The Alde 3020 Compact HE control panel has
two hard buttons and a non-capacitive, colour
touchscreen interface. The buttons displayed
on the screen are operated by touching the
screen with your finger.
Starting the System
1. Both the control panel and boiler are off.
2. To start the system, press the Power
button on the control panel. The Splash
Screen is displayed and green LED is
lit. The boiler will now start with the
previously saved settings (factory settings
by default).
The system will now be drawing variable 0.1–1.5
A of current from the 12V supply.