Bailey Moyes 912 Dragonfly, Руководство по обслуживанию

Страница: 126 / 191

Page 125
Note: The items set up for the graphical leaning pages (that is, the pages with the bar graphs), apply to
both of the bar graph pages.
Three or four letter identifiers are used to define the data that can be displayed, and a numeric entry
describes the position on the screen where this data appears. In addition to numerical data, several
characters may be selected to enhance the readability of your user-defined combination pages. The
following table describes these items.
EASY TIP: ( Do Not Do This )
If you would like to restore the instrument to the factory default
setup for the user-definable pages, starting from a normal display page (not a set page) turn off the
instrument, and press and hold the right button and turn the EIS back on. This will cause the EIS to
restore the factory default settings for these pages.
7.15.2 Table of User-Definable Page Entries.
Data to be Displayed Name used to
select this data on
the Configuration
Set Page.
Number
Of
Spaces
Required
Notes
Nothing displayed Off 0 This entry is skipped, and nothing is
printed to the screen. Set unused entries
to “Off”.
EGT1 EG1 4
EGT2 EG2 4
EGT3 EG3 4
EGT4 EG4 4
EGT5 EG5 4
EGT6 EG6 4
CHT1 CH1 3
CHT2 CH2 3
CHT3 CH3 3
CHT4 CH4 3
CHT5 CH5 3
CHT6 CH6 3
AUX5 AX5 3 or 4 User selections allow the data to be
displayed as an integer (no decimal
point), which requires 3 spaces, or a
decimal number which requires 4 digits.
AUX6 AX6 3 or 4
OILT OT 3
OILP OP 2
VOLT Volt 4
AUX1 AX1 3 or 4 User selections allow the data to be
displayed as an integer (no decimal
point), which requires 3 spaces, or a
decimal number which requires 4 digits.
AUX2 AX2 3 or 4
AUX3 AX3 3 or 4
AUX4 AX4 3 or 4
Coolant Temperature H2O 3
Not Used N/U -
Not Used N/U -
UNIT Int 3 This is the internal instrument
temperature
QPH QP Factory Use Only
FUEL Flow Flow 4