58
PARTS REQUIRED:
GABLE TRIM
3" (7,6 cm)
x2
RIGHT gable trim unit
LEFT GABLE TRIM UNIT
Flush
Flush
Flush
Flush
3" (7,6 cm)
Screws
3" (7,6 cm)
Screws
Flush at
Seam
RIGHT GABLE TRIM UNIT
x2
LEFT gable trim unit
24"
(61 cm)
Approximately
x16
Flush
Fig. B
You have finished installing your gable trim units.
FINISH
BEGIN
1
Secure with 3" screws into end rafter and spaced evenly (approximately 24" (61 cm).
Secure with 3" screws into end rafter and spaced evenly (approximately 24" (61 cm).
Repeat
Steps 1 - 2
for opposite side.
Line up
RIGHT gable trim unit
flush to gable panel center seam and flush with roof sheathing
(Fig. A, Fig. B)
.
Line up
LEFT gable trim unit
flush to
RIGHT gable trim unit
and flush with roof sheathing
(Fig. A, Fig. B)
. Check gable trim units are flush at peak.
2
3" (7,6 cm)
Screws
Flush
Fig. A
End View
Flush at Peak
Содержание Yardline 16574-SB
Страница 2: ...This page intentionally left blank...
