Backyard Yardline 16574-SB, Руководство пользователя

Страница: 57 / 90

55
PARTS REQUIRED:
ROOF PANELS
NOTE: Measurement from outside of wall panel NOTE: Measurement from outside of wall rafter
24-3/8"
(61,9) cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
1/2"
(1,3 cm)
GAP
Fig. B
Fig. E
Flush
2" Nails
Fig. C
Place a 48" x 96" upper roof
panel flush to lower panels.
Ensure 1/2" gap at gable end rafter
(Fig. B) and 3/4" measurement on
the rafter (Fig. A) .
Secure the lower edge of roof
panel with (2) 2" nails in corners,
as shown.
Move up to the top of the panel
and keep spacing between the
center of the rafters (Fig. C) .
Secure with (1) 2" nail into each
rafter (Fig. C) .
Place a 48" x 71-7/8" upper
roof panel fl ush with the
installed 48" x 96" panel
(Fig. D) .
Ensure 1/2" gap at gable end
rafter (Fig. E) .
Secure the lower edge of
roof panel with (2) 2" nails in
corners as shown.
Move up to the top of the panel
and keep spacing between the
center of the rafters (Fig. C) .
Secure with (1) 2" nail into
each rafter (Fig. C) .
5
6
Flush
Fig. D
3/4"
(1,9 cm)
Gauge
Block
Fig. A
Two Nails
NAIL
FIRST
Flush
Two Nails
NAIL
FIRST
48 x 96"
48 x 71-7/8"
1/2"
(1,3 cm)
GAP
24-3/8"
(61,9) cm)