BABYTREND HYBRID, Руководство пользователя

Страница: 45 / 50

87 88
10.0
Operation and Adjustments
10.0
Operation and Adjustments
10.5 Adjusting the Head Support
The Head Support on this Car Seat is designed to
provide maximum lateral head protection. Never
remove the Head Support from the Back Support.
The Head Support can be moved up or down
through a series of positions.
Pull knob for head support:
•
Pull Out Knob:
Allows you to
adjust height or lower down the
Head Support Raise or lower the
Head Support until the Head
Support moves into the desired
position to fit your child.
• Release Knob: Allows you to
fixate the Head Support to the
desired position. The Head
Support knob retracts back
in when the Head Support is
properly set into position.
The Head Support is equipped
with 6 height adjustments.
Note: Always use the position
that best craddles the childs
head.
Six Adjustment
levels
Pulll knob out to
adjust
Release knob
to lock
10.6 Assembly and Removal of Vehicle
Shoulder Belt Positioner
Use the Shoulder Belt Guide to center the
vehicle shoulder belt on the child’s shoulder.
Shoulder belt MUST be centered on child’s
shoulder as shown.
To attach Vehicle Shoulder Belt
Positioner:
- Lay Vehicle Shoulder Belt Positioner out
on flat surface with free end on top.
- Slide loop end down through one of the slots
at the back edge of the Seat Base.
- Thread the Shoulder Belt Guide and free end
of the Vehicle Shoulder Belt Positioner through
the loop on the loop end and pull to eliminate
any slack.
Note: The Shoulder Belt Guide should be
positioned so that the free end of the Vehicle
Shoulder Belt Positioner faces the front seat.
Free end
Loop end