BABYTREND HYBRID, Руководство пользователя

Страница: 42 / 50

81 82
10.0
Operation and Adjustments
10.0
Operation and Adjustments
To Re-attach Harness Straps / Adjust height positions:
Re-attach the Harness Straps at the required height by placing
the Harness Straps into the matching harness straps slots in the
Back Support Pad and Back Support,
c. Feed one Harness Strap Connector plate through
each Harness Strap End (1) . Ensure both Straps are
securely connected to the connector plate (2) .
SI NG
LE
U
SE A
PP
RO
VE D
BT
20
16
SIN
GLE
US
E A
PPR
OV ED
B
T 2
016
SINGLE
USE A
PPROV
ED
B
T 2016
SIN
G
LE
U SE
A
PP
RO
VE D
B
T 2
01
6
SIN
G LE
U
SE
A
PP
RO
VE
D
B
T 2
01
6
a. Thread the Harness Strap
through the Harness Slots in the
Seat Pad and Back Support at the
height at or just above the child’s
shoulders.
Note: Make sure that the Harness
Straps are through the Harness
Strap Slots at the same height
in the Back Support pad and the
Back Support.
b. From back of car seat, pull
Harness Straps through the
Harness Strap Slots in back
support until you have enough
strap to reach the Belt Connector
Plate
d. Inspect the Harness Straps from the front and back of the
car seat to ensure that they are not twisted. Twisted harness
straps can prevent proper tightening of the harness and
thus may not adequately restrain your child in a sharp turn,
sudden stop or crash. Before Using the car sat, please pull on
the harness straps from the front of the car seat to ensure
they are securely re-attached.