BABYTREND HYBRID, Руководство пользователя

Страница: 22 / 50

41 42
7.0
Toddler Car Seat (With Built-in
Harness) Installation and Use
7.0
Toddler Car Seat (With Built-in
Harness) Installation and Use
The “ REAR ENTRY ” belt routing must
be used when a Top Tether is NOT used
to secure this Car Seat.
Note:
Installation with Top Tether is
recommended whenever possible.
Baby Trend requires using the Top Tether
provided with this Car Seat whenever possible.
However when a tether anchor is not available
in the vehicle, the Car Seat can be secured
without the Top Tether. Always store the Top
Tether when not in use by securing the tether
hook to the Tether Storage on the lower
back of the Back Support as shown.
Based on the seating location selected, identify
if LATCH or a vehicle lap/shoulder or lap belt
only will be used to secure the car seat. Use
the LATCH system when available. Follow the
steps in the following sections for the type of
belt that will be used to secure the car seat.
Note:
Store tether on back of seat when
not in use.
7.4 Installation - WITHOUT Top Tether
REAR
ENTRY
Belt
Routing
7.4.1 Installation - LATCH WITHOUT Top Tether
Only use the car seat LATCH System in vehicle seating Only use the car seat LATCH System in vehicle seating
positions designated by the vehicle manufacturer positions designated by the vehicle manufacturer
for use with LATCH and have anchor spacing of 11 for use with LATCH and have anchor spacing of 11
inches (280 mm). The car seat must be held tightly by inches (280 mm). The car seat must be held tightly by
the LATCH System.Never attach more than one lower the LATCH System.Never attach more than one lower
anchor connector or top tether hook to a vehicle anchor connector or top tether hook to a vehicle
anchorage unless recommended in the vehicle anchorage unless recommended in the vehicle
owner’s manual. owner’s manual.
The LATCH attachment system should be used
WITH
the Top
Tether up to 50 lbs. (23 kg) whenever a secure installation can be
achieved. When used
WITHOUT
the Top Tether the LATCH attach-
ment system may be used to 50 lbs. (23 kg)
or maximum weight for LATCH use specified
by the vehicle’s owner’s manual.
To secure car seat in vehicle:
1. Assemble the Back Support (see “Assembly
and Removal of Back Support”
Section 10.1
).
2. Store Top Tether by securing Tether
Hook on Tether Storage at bottom
of Back Support as shown.
LATCH Connectors
Top Tether
Tether/LATCH
Storage
LATCH Connectors
Top Tether
Tether/LATCH
Storage
WARNING WARNING