BABYTREND HYBRID, Руководство пользователя

Страница: 31 / 50

59 60
8.0
Booster Car Seat (Without Built-in
Harness) Installation and Use
8.0
Booster Car Seat (Without Built-in
Harness) Installation and Use
5. If the vehicle seat back is adjustable,
adjust into the upright position or the
position specified in the vehicle owner’s
manual for use with a car seat.
6. Thread shoulder belt into the
inner slot of Booster Shoulder
Belt Guide located on the
underside of the Head Support.
- Slide shoulder belt into open
end of slot, around Belt Retainer
Tab and into Inner Slot of Head Support.
NOTE:
Vehicle shoulder belt must slide
freely through inner slot of Booster
Shoulder Belt Guide.
7. Place child in High-back Booster Car Seat
with child’s back and rump contacting
seating surfaces.
8. Pull the vehicle lap/shoulder belt across
front of child and under both armrests.
Buckle vehicle seat belt.
- Vehicle shoulder belt on buckle side
must be under armrest.
- Position vehicle lap belt under armrests
and low on hips, contacting
top of thighs.
- Position vehicle shoulder
belt across chest and
shoulder.
Inner
Slot
Belt
Retainer
Tab
9. Adjust Head Support so that the vehicle
shoulder belt passes over the shoulder
midway between the neck and the end
of the shoulder. The Booster Shoulder
Belt Guide in the Head Support should
be just above the child’s shoulders.
10.Snugly adjust the vehicle lap/shoulder belt according to the
instructions in the vehicle owner’s manual. Vehicle lap belt
must stay under both armrests.