BABYTREND HYBRID, Руководство пользователя

Страница: 15 / 50

27 28
7.0
Toddler Car Seat (With Built-in
Harness) Installation and Use
7.0
Toddler Car Seat (With Built-in
Harness) Installation and Use
Installation WITHOUT Top Tether
“REAR ENTRY” Belt Routing
The “
REAR ENTRY
” belt routing is used to secure the Toddler Car
Seat (WITH Harness) when installed
WITHOUT
the Top Tether.
The LATCH lower anchor belt and vehicle seat belts are routed
through the “
REAR ENTRY
” belt path in the same way.
“REAR ENTRY” Belt Routing
7.3
Installation WITH Top Tether
The “
FRONT ENTRY
” belt routing, must
be used when the Top Tether is used to
secure this Car Seat.
Based on the seating location selected,
identify if LATCH, vehicle Lap/Shoulder
or vehicle Lap Belt only will be used
to secure the Car Seat. Use the
LATCH system when available.
Follow the steps in the following
sections for the type of belt that
will be used to secure the Car Seat.
The Top Tether must be secured and tensioned properly when
using the “front entry” belt routing.
Top
Tether
FRONT
ENTRY
Belt
Routing
1
2
3
Back
Support
Belt Path
Openings
• From the rear of the car seat, in-
sert the LATCH connector or the
vehicle seat belt latch plate into
the Belt Path Opening in the Back
Support
(1)
.
• Pull the LATCH or vehicle seat
belt through the Belt Path Open-
ing and across the front of Back
Support to the Belt Path Opening
on the opposite side
(2)
.
• From the front of the Back Support, insert the LATCH connec-
tor or the vehicle seat belt latch plate into the Belt Path Open-
ing in the Back Support and pull the LATCH or vehicle seat belt
through
(3)
.
Note:
Store tether on back of seat when not in use as shown on
page 41.