BABYTREND HYBRID, Руководство пользователя

Страница: 47 / 50

91 92
12.0
Cleaning and Maintenance
12.0
Cleaning and Maintenance
12.0 Cleaning and Maintenance
The hard surfaces of the Car Seat (plastic components and metal
parts) except the Buckle, may be cleaned by wiping with a
solution of water with mild soap. DO NOT use bleach as it may
weaken plastic component. Dry all surfaces with a clean towel.
DO NOT use lubricants of any kind on any of the components of
the Car Seat, including buckle and LATCH system.
To clean the Buckle, rinse or wipe with clean warm water, no
soap. Dry buckle.
Keep Harness adjuster area clean and free of dirt. To clean Har-
ness adjuster, vacuum or rise area with clean warm water, no
soap. Dry before use.
Care and Cleaning Harness System Seat,
Back Support and Head Support Pads:
NOTE: Before removing the seat pads, you must first remove
the back support from the Car Seat base. If the harness is at-
tached to the Car Seat, it is best to loosen or remove the harness
before removing the back support.
• For care and maintenance, read and follow instructions on
fabric tags.
To Remove Head Support Pad:
• Slide elastic loops out of inner shoulder belt slot.
• Pull pad off head support.
To Remove Back Support Pad:
• Remove harness (see “Threading and Removing Harness”
section page 79).
• Remove back support from Seat Base (see “Assembly and
Removal of Back Support” section).
• Unhook top of pad from top of back support.
• Unhook elastic loops top corners of pad from plastic pins
on back support.
• Unhook elastic loops from bottom corners of pad from
plastic pins on back support.
• Slide back support pad off of back support.
To Remove Vehicle Shoulder Belt Positioner:
• From back of car seat, unthread the Shoulder Belt
Positioner from the loop end.
• Store the Shoulder Belt Positioner in pouch located on side
of seat base.
DO NOT DO NOT use Car Seat without seat, back support and use Car Seat without seat, back support and
head support pads. head support pads.
WARNING WARNING