77
78
10.0
Operation and Adjustments
10.0
Operation and Adjustments
10.2 Changing Harness Strap Adjustment
The harness system on this Car Seat has an adjuster allowing
adjustment of harness strap for a snug fit on your child.
Routine inspect to assure adjuster button area is free
and clear of dirt.
To tighten harness strap:
1. Tighten the harness straps to snugly
adjust harness around child by pulling
the Harness Adjuster Strap at the
front of the Car Seat as shown.
2. Make sure the straps are flat and
snug against the child’s shoulders
and thighs.
NOTE: A snug strap should not allow
any slack. It lies in a relatively straight
line without sagging. It does not
press on the child’s flesh or push
the child’s body into an unnatural
position.
To prevent injury from contact with the vehicle
To prevent injury from contact with the vehicle
interior or ejection, the harness system must be snugly
interior or ejection, the harness system must be snugly
adjusted around child.
adjusted around child.
3. Check that the Harness Straps are snugly
adjusted. The harness strap is properly
tightened if you are not able to insert more
than one finger between the harness strap
and the child’s shoulder or thigh.
4. Pull on the harness assembly to be sure it
is tight and cannot become loose.
5.
DO NOT
use the Car Seat if the harness
assembly can become loose. Check to see if
the harness adjuster area is free of dirt. Contact
Baby Trend at 1-800-328-7363 for assistance.
To loosen harness or lengthen the harness strap:
1. Unbuckle harness.
2. Loosen built-in safety harness by
pressing the Harness Adjuster Button
(1)
and pulling the harness assembly
toward you
(2)
.
1
2
WARNING
WARNING
Содержание HYBRID
Страница 50: ...97 98 NOTES...