BABYTREND HYBRID, Руководство пользователя, Страница: 16 / 50

29 30
7.0
Toddler Car Seat (With Built-in
Harness) Installation and Use
7.0
Toddler Car Seat (With Built-in
Harness) Installation and Use
3. Route the LATCH lower anchor belt
using the “ FRONT ENTRY ” belt routing
as shown in Section 7.2.
4. Place Top Tether Strap over the top
of the Head Support and rest inside
seating area.
5. Place the Car Seat on the vehicle seat
in a seating location equipped with
LATCH and centered between the LATCH
anchorages (see “Selecting a
Vehicle Seating Location” section).
6. If the vehicle seat back is adjustable,
adjust into the upright position or the
position specified in the vehicle owner’s
manual for use with a car seat.
7. Use the LATCH connectors to hook into
the vehicle anchors as seen in (1) ›and (2) .
Ensure the connectors attached and
secure onto the vehicle anchorage.
8. Pull to check that the connectors
are securely attached (3) .
1
3
2
7.3.1 Installation - LATCH WITH Top Tether
Only use the car seat LATCH System in vehicle seating
positions designated by the vehicle manufacturer as
LATCH use position and have anchor spacing of 11
inches (280 mm). The car seat must be held tightly by
the LATCH System. Never attach more than one lower
anchor connector or top tether hook to a vehicle
anchorage unless recommended in the vehicle
owner’s manual.
The LATCH attachment system, when used with the Top Tether,
may be used to 50 lbs. (23 kg).
To secure car seat in vehicle:
1. Assemble of the Back Support (see “Assembly and Removal of
Back Support” section). Refer to page 72.
Top
Tether
FRONT
ENTRY
Belt
Routing
LATCH
Connector
Top
Tether
2. Adjust the harness strap height for your
child – Harness straps MUST be at or above
the child’s shoulders (see “Changing Harness
Strap Height” Section 10.3 ).
WARNING WARNING