Baby Lock Valiant BMV10, Инструкция и справочник

Страница: 82 / 316

80
Technical terms:
■
DST
This is the extension of Tajima data file (*.dst) that is
one of the data formats of embroidery patterns.
Tajima data does not contain color information,
therefore the embroidery machine automatically
assigns colors when a Tajima (.dst) file is loaded.
(Refer to page 250.)
■
Needle number
The needles are numbered from right to left. The far
right needle is number 1 needle. (Refer to page 7.)
■
Needle at the “embroidering
position”
This is the needle that is placed above the needle
hole in the needle plate. The needle bar case is
moved to position that particular needle with the
next thread color to the “embroidering position”.
Also when using the needle threader, the needle that
is going to be threaded should be moved to the
“position of embroidery”. (Refer to page 62 and
page 63.)
1
Needle hole in the needle plate
2
Needle
■
Wiper
This is the mechanism for pulling the thread. The
wiper pulls the thread when the needle threader is
used.
The wiper also pulls the thread from the material
when the machine trims the thread. This makes
trimming threads after embroidering un-necessary.
(Refer to page 62.)
Patterns:
Following patterns can be processed by the
machine to embroider.
- Use USB media or SD cards to transfer the
embroidery data with *.pen, *.pes, *.phc or *.dst
format to the machine.
Using the USB cable, the data can be transferred
from the PC to the machine.
- Optional embroidery cards
- Embroidery patterns created by digitizing software
program
- The patterns saved on USB media by the machine
Embroidering:
■
Customize the embroidery colors
- Use the thread color function by selecting either
64 colors or 300 colors, or by setting the custom
thread color table on the pattern editing screen.
For more details, see page 195 and page 197.
- Use the manual color sequence function in the
embroidering settings screen.
For more details, see page 132.
- Use the “Temporary needle bar setting” function
by selecting the key on the “Embroidering” screen.
More details please see the page 142.
■
Resume an unfinished pattern from
the last time the machine was
switched off.
- The machine remembers the pattern and the
position even after turning off the power. And the
machine can resume the embroidery when the
machine turns on again. (Refer to “Resume
Embroidering After Turning Off the Machine” on
page 122.)
When You Have a Question, This May Help You