Baby Lock Valiant BMV10, Инструкция и справочник

Страница: 257 / 316

APPENDIX
255
7
Patterns can be created in embroidery editing software version Palette 9 or later to be used with the
Jumbo frame (optional).
When a jumbo frame pattern is created in embroidery editing software, the pattern is automatically
divided into two sections that can be combined into a single embroidery design when it is sewn with the
jumbo frame. When the jumbo frame is used, embroidery with a maximum size of 350 mm × 350 mm
(14 inches × 14 inches) can be sewn without having to shift the fabric within the frame.
For details on creating jumbo frame patterns, refer to the Instruction Manual provided with the
embroidery editing software version Palette 9 or later.
After the jumbo frame pattern has been created, follow the procedure described below to transfer the
pattern to the machine using external connection and begin embroidering.
Jumbo frame patterns consist of a set of two patterns. To be able to use them as a jumbo frame pattern, do
not save them in the machine's memory.
a
Connect the device containing the jumbo
frame pattern to this machine, and then
select the jumbo frame pattern from the
pattern selection screen.
* For details on importing the pattern, refer to
“Recalling from USB media/SD card” on page 164.
b
Touch to select the first section of the
pattern to be embroidered, and then touch
.
Embroidery Patterns for the Optional Jumbo Frame
Note
• Before you start sewing the jumbo frame
pattern, prepare the optional jumbo frame.
• Contact your authorized Baby Lock retailer
for purchasing the optional jumbo frame.
• After hooping fabric or a garment, make
sure that the inner frame is lower than the
outer frame so that the frame sits flat
against the extension table.