Baby Lock Valiant BMV10, Инструкция и справочник

Страница: 288 / 316

286
■
Oiling the needle bars
From embroidering screen, select one needle bar at
a time. (Refer to page 63 for needle bar screen). Turn
the handwheel counterclockwise bringing the
needle bar to its lowest position. Put one drop of oil,
as high as possible on the needle bar above the felt
washer.
1
Apply oil here.
• Too much oil may drip onto sewing project.
About the maintenance message
Once this message appears, it is recommended to
take your machine to your nearest authorized
Baby Lock retailer for a regular maintenance
check. Although this message will disappear and
the machine will continue to function once you
touch
, the message will display several more
times until the appropriate maintenance is
performed.
Please take the time to arrange for the
maintenance that your machine requires once this
message appears. Such steps will help to ensure
you receive continued, uninterrupted hours of
machine operation for the future.
Note
• Put a drop of oil onto the hook once a day
before use.
• Apply one drop of oil on the lower needle
bar above the felt washer every 40 – 50
hours of sewing time.
• Apply only sewing machine oil. Use of any
other type of oil may result in damage to the
embroidery machine.
• Do not apply too much oil. Fabric or thread
may get contaminated. If too much oil is
applied, wipe off any excess with a rag.
• If the thread breaks while sewing or the
operating noise of the hook becomes loud,
apply oil onto the race hook.