Baby Lock Valiant BMV10, Инструкция и справочник

Страница: 262 / 316

260
Types of caps
With the machine, we recommend that the
following types of caps be embroidered.
■
Standard (Pro Style)
1
Face: Pro style
2
6 sections
■
Low Profile (Low fitting)
1
Face: Low fitting
2
6 sections
Memo
• Before installing the cap frame, be sure to
adjust the ring of the cap frame driver and
the height of the L-shaped bracket. (If the
same machine is being used, this
adjustment is only required the first time
that it is used. In addition, this adjustment is
not necessary if the included cap frame is
installed.)
• After the ring of the cap frame driver and the
height of the L-shaped bracket have been
adjusted, they must be adjusted again if a
different machine is being used. The height
may differ depending on the machine that is
used. For details, contact your authorized
Baby Lock retailer.
Note
• If the cap embroidery frame is attached, the
embroidery frame indicators, showing which
embroidery frames can be used, appear as
shown below.
50 mm (H) × 130 mm (W)
(2 inches (H) × 5-1/8
inches (W))
60 mm (H) × 130 mm (W)
(2-3/8 inches (H) × 5-1/8
inches (W))
60 mm (H) × 360 mm (W)
(2-3/8 inches (H) × 14
inches (W))
Otto
International,
Inc. cap model
number
(Example)
OTTO27-007
Mesh backing on
the back of front
panels
(soft or hard)
Constructed firm
front Unconstructed
soft crown
Ease of framing
(hooping)
Easy (Recommended) Fairly easy
Backing 1 to 2 ply 2 to 3 ply
Otto
International,
Inc. cap model
number
(Example)
OTTO23-225 OTTO18-203
Mesh backing on
the back of front
panels
(soft or hard)
Constructed firm
front Unconstructed
soft crown
Ease of framing
(hooping)
Very difficult
(because the cap
material is very
hard.)
Fairly easy
Backing 1 to 2 ply 2 to 3 ply