Baby Lock Valiant BMV10, Инструкция и справочник

Страница: 231 / 316

BASIC SETTINGS AND HELP FEATURE
229
6
Changing the embroidery basting
distance
The distance from the pattern to the basting
stitching can be set to 0.0 mm to 12.0 mm.
When the embroidery machine is purchased, “5.0
mm” is selected. Refer to “Basting Embroidery” on
page 128 when using this setting.
The distance setting can be specified from page 2
of the settings screen.
a
Use and to specify the distance from
the pattern to the basting stitching.
Selecting the “Eco Mode” or
“Shutoff Support Mode”
You can save the machine power by setting the
eco mode or the shutoff support mode.
If you leave the machine without using for a
specified period of time, the machine enters in one
of these modes.
“Eco Mode”;
Machine will enter a sleep mode. Touch the
screen or “Start/Stop” button to continue
embroidering.
“Shutoff Support Mode”;
Machine will turn off after set period of time. Turn
machine off and then back on to restart
embroidering.
Press the “Start/Stop” button or touch the screen
display to recover from these modes.
These settings can be specified from page 4 of the
settings screen.
a
Use or to select the time until
entering the mode.
Changing the screen saver
settings
■
Specifying the length of time until
the screen saver is displayed
The screen saver is displayed when no machine
operation is performed for the specified length of
time.
A setting between “OFF” (0) and “60” minutes can
be set in 1-minute increments.
When the embroidery machine is purchased, “5
min” is selected.
The screen saver settings can be specified from page
4 of the settings screen.
a
Touch and to select the desired
setting.
Condition Eco Mode
Shutoff Support
Mode
Available time OFF, 10 - 120
(minute) OFF, 1 - 12 (hour)
“Start/Stop” button Green flashing Green slow
flashing
Suspended
function Machine light,
Screen display All functions
After recovering The machine starts
from the previous
operation. You need to turn off
the machine.
Note
• If you turn off the machine while the
machine is in the “Eco Mode” or the
“Shutoff Support Mode”, wait for about 5
seconds before turning on the machine
again.