8 | Pro-Stitcher Lite for the Baby Lock Gallant/Villa Frame
www.ProStitcher.com
Recommended Use and Storage
1. It is recommended that our products be operated within in a temperature range of 60°F to 90°F.
2. Store products in a climate-controlled environment with the following provisions:
• Store machine in the original packaging, which contains the internal supports designed
specifically to maintain and protect the machine during transport or storage.
• Detach cables and accessories before packing.
• To best protect your electronics, store them in the original packaging, especially any that
arrived in antistatic containers.
3. Storage or use in an environment other than what is recommended may result in
• Damaging condensation
• Rust
• Premature wear
• Overheating
• Poor performance
• Shortened battery life
4. The tablet warranty, if applicable, is VOID if the tablet is stored in temperatures below 32°F or
above 110°F. Do not leave the tablet in a vehicle or other enclosed space where the temperature
may exceed 110°F.
5. If the product is stored at a temperature above or below the recommended operating range, allow
the machine to acclimate to the operating environment before use.
Low Power Protection Mode
FOR CHUWI BRAND TABLETS ONLY
—If the battery of the tablet is left uncharged for a long time, it
will enter a power protection mode. At this time, when you plug in the tablet to charge, there will be no
battery icon prompt, and the tablet will not turn on immediately.
To turn on and charge your tablet normally again, follow these instructions:
1. Plug in the charger to the tablet.
2. Press and hold the power button on the tablet for 15 seconds.
3. Confirm that the LED light turns red.
4. Charge the tablet for at least 1 hour.
5. Power on the tablet as normal.
NOTE
: The above instructions may not apply to your particular Pro-Stitcher tablet. If you cannot
solve the issue following these instructions, please contact Pro-Stitcher’s technical support.
