Pro-Stitcher Lite for the Baby Lock Gallant/Villa Frame
Installation Instructions | 35
Problem/Symptom
Corrective Measure
Error messages
Buffer Underflow
If a message with the words "Buffer Underflow"
appears while stitching, it is an indication that data is
not getting to the motors quickly enough. This may be
due to something in the tablet computer tying up the
CPU. Although it may be possible to resume quilting by
simply pressing the red X box to close the error message
and then pressing the Motor Error lightning bolt button
at the top right-hand corner of the screen, it is best to
cancel the current design stitch-out, save the pattern,
and reboot the computer. Use the
New Start Point
function if necessary to resume from where stitching
was left off.
System Restore
or
System Repair
message on
start-up.
If a message appears on start-up (black screen, white
text) that asks whether to run System Restore or Start
Windows Normally, select
Start Windows Normally
.
The system should resume as normal. The computer
will default to the System Restore screen (more of a
typical Windows blue/white screen) if you do not select
the Start Normally option in time. If this occurs, use the
power switch to reboot the computer and try again.
