Pro-Stitcher Lite for the Baby Lock Gallant/Villa Frame
Installation Instructions | 33
Problem/Symptom
Corrective Measure
Positioning a pattern using the Reset Home button
When the
Reset Home
button is pressed, the
pattern is not positioned properly.
The Reset Home button is not intended to be used as
a repositioning tool. Reset Home simply makes the
current needle position match up with the “X=0, Y=0”
point of the pattern. This “0,0” position can vary from
pattern to pattern, so the best way to reposition is by
using the Area or Reposition tools from the menu.
Quilting machine stuck in a faster speed than selected by Pro-Stitcher Lite
Stitch length is much smaller than selected;
machine running faster than it should.
Something has caused the quilting machine to lock up
at a higher speed (tighter SPI) than selected. Rebooting
both the quilting machine and the Pro-Stitcher Lite
tablet should resolve the issue.
No patterns or folders show up in the design library
The current path is pointing to the wrong drive
letter.
Designs are stored on the computer’s hard drive and on
the removable USB flash drive. If you are attempting to
access designs specifically on the USB flash drive, make
sure the USB flash drive is plugged in securely to the
Pro-Stitcher Lite tablet computer. Press
Cancel
if the
Open screen is already open, remove the USB flash drive,
wait about 15 seconds, insert the USB drive, and then
press the
Open
button again.
The patterns that come preloaded on the Pro-Stitcher
USB Flash drive are located in a folder called Designs
(usually drive D:\ or E:\). From the Open window, select
a drive letter by pressing on the arrow button next to
the drive you wish to browse. If there is a circle with a
^ symbol on the right-hand side of the button, it means
there are more folders in that particular path.
If there continues to be nothing showing up on the USB
flash drive, plug it into a desktop or laptop computer
and verify that the USB flash drive has the desired files
on it. If the computer says it wants to reformat the flash
drive, then the flash drive has gone bad and will need
to be replaced. If it opens but there are no files on the
flash drive, contact Pro-Stitcher for replacement files.*
*Pro-Stitcher highly recommends backing up all pattern
files on a home computer or another disk.
