B-TEK Scales Centurion-DT, Руководство по установке

Страница: 30 / 47

29

Shims (metal or wood) will be required to achieve proper elevation of the wood
timber. Additional shims can be used in the center of the module to create a
positive crown. Refer to the following section in the manual regarding crowning the
scale module.

Shims are required in the middle of the scale width and under each outside main
beam of the weighbridge.

The wood timber and shims should be set at the proper elevation prior to setting
the scale module on “dummy” load cell pins.

Insure that the wood timbers are snug against the bottom of the scale weighbridge
prior to pouring the concrete deck.

Ensure the weighbridge deck is properly cured prior to removing the wood timbers.
Timbers can be removed when load cells are installed in place of “dummy” cell
pins.
TOP VIEW OF
SCALE MODULE
SIDE VIEW OF
SCALE MODULE
SHORING BRACES
WOODEN SUPPORT
AND SHIMS UNDER
CENTER SHORING BRACE