B-TEK Scales Centurion-DT, Руководство по установке

Страница: 27 / 47

26
Each subsequent 2-cell module, if used, will be installed identical to the module in the
previous section, with the load cell nest upper connection bracket mating with the load
cell nest lower connection bracket of the adjacent module, with the opposite end of the
module resting on dummy load cell stands.
Connecting modules will be marked “A-A”, “B-B”, “C-C”, etc. on the module end plates
for however many modules are used in the complete scale.
Once all of the modules have been connected and bolted together verify all
dimensions and clearances with the scale and foundation. If needed, make any
adjustments while the cover plates are still removed.
Although cover plates will not be installed until later in the installation, check the
fitment of the cover plates throughout the installation process. Note that the bolt
hole locations of the cover plates are not symmetrical. If the thru holes do not
line up with the weighbridge hole locations, rotate the cover plate 180º.