B. Braun HORIZON Nxt Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 61

background image

Horizon Nxt®
Modular Infusion System 1 - 1 6/00
950520 Rev F

Chapter 1 INTRODUCTION

Warranty

B. Braun Medical Inc., hereby warrants that reasonable care has been used
in the manufacture of each Horizon Nxt® and that it shall be free from
defects in material and workmanship for a period of two years after the date
of shipment, when properly used and maintained. Any Horizon Nxt® that
is found not to meet these standards within this two-year period will be
repaired after examination by B. Braun Medical or, at B. Braun Medical’s
option, will be replaced without charge. If the defect has been caused by
misuse, unauthorized modification, or abnormal conditions or operation,
repairs will be billed at B. Braun Medical’s then current charges. In this
case, an estimate will be submitted before work is started, if requested. The
defective device should be returned promptly to B. Braun Medical, properly
packaged, postage prepaid. Loss or damage in return shipment to B. Braun
Medical will be at purchaser’s risk. The foregoing express warranty, as
conditioned and limited, is in lieu of and excludes all other warranties not
expressly set forth herein, whether expressed or implied by operation of law
or otherwise including, but not limited to, any implied warranties of
merchantability or fitness, since handling, storage, and cleaning of these
devices, as well as factors relating to other matters beyond B. Braun
Medical’s control, directly affect these devices and the results obtained from
their use. B. Braun Medical shall not be liable for any incidental or
consequential loss, damage, or expense, directly or indirectly arising from
the use of this device other than replacement of all or part of it. B. Braun
Medical neither assumes, nor authorizes any other person to assume for it,
another or additional liability or responsibility in connection with this
device.

This warranty will not apply to any Horizon Nxt® or component thereof
which has been: (1) repaired by anyone other than an authorized B. Braun
Medical trained technician or repair facility; (2) altered in any way that, in
B. Braun Medical’s judgement, affects its stability or reliability; (3)
subjected to misuse, negligent handling, or accident; (4) used in any manner
not in accordance with the instructions furnished by B. Braun Medical in the
Operation and/or Service Manual.

This warranty extends only to the first purchaser or lessee and does not
extend to, and may not be enforced by, any other person.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
3
4
5
6
7
...
»

Содержание HORIZON Nxt






























































Отзывы:

Нет отзывов

Похожие инструкции для HORIZON Nxt

Бренд: KaVo Страницы: 13

Бренд: vc999 Страницы: 52

Бренд: YATEK Страницы: 72

Бренд: Dana Design Страницы: 20

Бренд: EuroLite Страницы: 28

Бренд: Maeda Страницы: 276

Бренд: Qiagen Страницы: 48

Бренд: Qiagen Страницы: 162

Бренд: Qazqa Страницы: 4

Бренд: Qlightec Страницы: 12

Бренд: VDO Страницы: 15

Бренд: VDO Страницы: 20

MCX-C15 - MusicCAST Network Audio Player

Бренд: Yamaha Страницы: 114

Бренд: Marcy Страницы: 9

Бренд: Yacht Devices Страницы: 68

Бренд: GE Страницы: 2

Бренд: Unika Страницы: 8

Бренд: Veit Brisay Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды