B+B SmartWorx V3, Руководство по настройке

Страница: 102 / 112

7. CONFIGURATION IN TYP. SITUATIONS
7. Configuration in Typ. Situations
Although Conel routers have wide variety of usage, they are used in these typical situations
mostly. In this chapter, there are four examples of router’s configuration in the typical situations.
Examples include the configuration of all items needed for router to work properly in that
situation.
7.1 Access to the Internet from LAN
Figure 77: Access to the Internet from LAN – topology of the example
There is topology of this easy example shown on the fig. 77. To connect to the Internet
via mobile network the SIM card with the data tariff has to be available from the operator.
This basic router’s function
does not need any configuration in this case. It is sufficient
to put the SIM card into the SIM1 slot (Primary SIM card), attach the antenna to the ANT
connector and connect the computer (or switch and computers) to the router’s ETH0 interface
(LAN). Wait a moment after turning on the router. It will connect to the mobile network and
the Internet signalized by LEDs on the front panel of the router (WAN and DAT). Additional
configuration can be done in the
LAN and Mobile WAN items in the Configuration section of
the web interface.
LAN configuration The factory default IP adress of the eth0 router’s interface is in the form
of 192.168.1.1. This can be changed (after login to the router) in the LAN item in the Config-
uration
section, see figure 78. In this case there is no need of any additional configuration,
DHCP server is also enabled by factory default (so the first connected computer will get the
192.168.1.2 IP address etc.). Other configuration possibilities are described in the chapter 4.1.
93