B+B SmartWorx V3, Руководство по настройке

Страница: 34 / 112

4. CONFIGURATION
ones. Checking can be set separately for two SIM cards or two APNs. As a ping address can
be used an IP address for which it is certain that it is still functional and is possible to send
ICMP ping (e.g. DNS server of operator).
In the case of the enabled option ping requests are sent on the basis of routing table. Thus,
the requests may be sent through any available interface. If you require each ping request to
be sent through the network interface, which was created on the occasion of establishing a
connection to the mobile operator, it is necessary to set the
Check Connection item to enabled
+ bind . The disabled variant deactivates checking the connection to mobile network.
Item Description
Ping IP Address Destinations IP address or domain name of ping queries.
Ping Interval Time intervals between the outgoing pings.
Table 18: Check connection to mobile network configuration
If the Enable Traffic Monitoring option is selected, then the router stops sending ping ques-
tions to the Ping IP Address and it will watch traffic in connection to mobile network. If this
connection is without traffic longer than the Ping Interval, then the router sends ping questions
to the Ping IP Address.
Attention! The enabling of Check connection to mobile network is necessary for
uninterrupted and lasting operation of the router.
4.2.4 Data Limit Configuration
Item Description
Data limit With this parameter you can set the maximum expected amount
of data transmitted (sent and received) over GPRS in one billing
period (month).
Warning Threshold Parameter Warning Threshold determine per cent of Data Limit in
the range of 50% to 99%, which if is exceeded, then the router
sends SMS in the form
Router has exceeded (value of Warning
Threshold) of data limit .
Accounting Start Parameter sets the day of the month in which the billing cycle
starts SIM card used. Start of the billing period defines the op-
erator, which gives the SIM card. The router begin to count the
transferred data since that day.
Table 19: Data limit configuration
If parameters Switch to backup SIM card when data limit is exceeded and switch to default
SIM card when data limit isn’t exceeded (see next subsection) or Send SMS when datalimit
is exceeded (see SMS configuration) are not selected, the data limit will not count using the
oldest versions of Conel routers.
25