B+B SmartWorx V3, Руководство по настройке

Страница: 21 / 112

3. STATUS
3.5 Network Status
To view system information about the router operation, select the Network item in the Sta-
tus
menu. The upper part of the window displays detailed information about active interfaces:
Interface Description
eth0, eth1, eth2 Network interfaces (ethernet connection)
usb0 Active PPP connection to the mobile network – wireless module is con-
nected via USB interface
wlan0 WiFi interface
ppp0 PPP interface (e.g. PPPoE tunnel)
tun0 OpenVPN tunnel interface
ipsec0 IPSec tunnel interface
gre1 GRE tunnel interface
lo Local loopback interface
Table 11: Description of interface in network status
Each of the interfaces shows the following information:
Item Description
HWaddr Hardware (unique) address of networks interface
inet IP address of interface
P-t-P IP address second ends connection
Bcast Broadcast address
Mask Mask of network
MTU Maximum packet size that the equipment is able to transmit
Metric Number of routers, over which packet must go trought
RX
•
packets – received packets
•
errors – number of errors
•
dropped – dropped packets
•
overruns – incoming packets lost because of overload
•
frame – wrong incoming packets because of incorrect packet size
Continued on next page
12