Azbil Micro Flow MQV0005, Руководство пользователя

Страница: 48 / 90

5-2
Chapter 5. ADVANCED OPERATION
5 - 1 Functions
This section describes how to set up functions.
IInstantaneous flow rate display
[DISP] key
Flow set value display
[DISP] key
Totalized flow display
[DISP] key
Valve amperage display
Power-ON
Function setup mode
Parameter setup mode
Device information display mode
key + [ENT] key
(3 s or more)
[DISP] key
key
(3 s or more)
key (3 s or more)
Basic operation Advanced operation
[DISP] key
[ ]
[ ]
[ ]
„
Setup method
Follow the procedure below to set functions such as event output type
and external contact input assignments:
(1) Press the
[DISP] key several times to display the instantaneous
flow rate.
>> The PV and L/min ("mL/min" on the MQV9020/9050) lamps
light.
(2) Hold down the and the [ENT] keys for three seconds or more.
>> Item
C-0 1
is displayed on the 7-segment display and mode
changes to the function setup mode.
(3) Press the [ ▲ ] or [ ▼ ] key to select the desired setup item number,
and then press the
[ENT]
key.
>> The current setting value blinks on the 7-segment display.
(4) Press the
[
▲
]
or
[
▼
]
key to select the desired setting.
(5) When you have selected the desired setting, press the [ENT] key
to enter the setting.
>> The setting value is updated. (At this point, the setting value is
saved.)
(6) If you want to set up other items, return to step (3) and repeat
the procedure.
Otherwise, proceed to step (7).
(7) Press the [DISP] key.
>> The function setup mode changes to the instantaneous flow rate
display.
Handling Precautions
•
If you do not press any keys for one minute after entering the
function setup mode, the display automatically returns to the
instantaneous flow rate display.
•
If you press the [DISP] key without pressing the [ENT] key after
carrying out the operation in step (4), the setting remains at
the previous value without being updated.