Azbil Micro Flow MQV0002, Руководство пользователя

Страница: 39 / 94

4-5
Chapter 4. BASIC OPERATION
„  Digital flow rate setup
Up to eight SP values can be set on this device. The operating procedure may vary
depending on the number of SP values to be set.
„ z Single setup (number of SPs in function setup
C-04
is 1)
Follow the procedure below to change the SP value:
(1) Press the
DISP key .
>> The SP (flow rate setpoint) is shown on the 7-segment display
(2) Change the SP value by pressing the or
keys
. You can move to the digit to
be changed by pressing the
key
.
>> The digit currently being changed starts blinking.
(3) When you have reached the target value, press the
ENT key
.
>> The SP value is set, and saved.
Note (Advanced use, direct setup function)
•
Control can be executed using an SP value currently being changed
(indicated by blinking display) when the direct setup function is enabled
for the instantaneous flow rate direct setup function ON/OFF (
C-2 1
in the
function setup). In this case, the ENT key need not be pressed to enter the SP
value.
Handling Precautions
•
When switching the display by pressing the DISP key, first press the ENT
key to enter the SP value, and switch the display.
For details on how to set up functions,
Chapter 5. ADVANCED
OPERATION.
„ z
Multi-setup (number of SPs in function setup
C-04
is 2 to 8)
In multi-setup, up to eight SP values can be switched by key operation and by
external contact input.
Follow the procedure below to change the SP No. and SP value:
(1) Press the
DISP key
.
>> The display switches to SP No.
SP-0
to
SP-7
after about one second.
(2) Press the or keys to change the SP No. and press the ENT key .
>> The SP No. is entered.
(3) Change the SP value by pressing the or keys . You can move to the digit to
be changed by pressing the key .
>> The digit currently being changed blinks while the SP value is being changed.
(4) When you have reached the target value, press the
ENT key
to enter the new SP
value.
>> The SP value and SP No. are updated, and the SP value of the selected SP No. is
new the active SP.