Axis A20 Скачать руководство пользователя страница 173

Страница: 173 / 216

Axis

Owners

Manual

2019

Page 162

In checking the engine mounts, be sure to do this before starting the engine. Components on

the engine can become hot enough to burn skin. Avoid this by checking before starting.

Any time you suspect an engine mount is loose, it must be tightened. If the engine is allowed

to shake or move during operation, it adversely affects the entire drive-train and could cause

damage that would not be covered under warranty.

Some flaps and components of the

exhaust system are composed of high-

grade rubber and synthetics. These may

deteriorate over time. Check to ensure that

the flaps fit securely over the exhaust port

and that they will open with ease, which is

what must occur when the boat engine is

running.

There is little the consumer can do to correct issues with the steering system, but

it is critical to the safety of those on-board that steering problems are immediately

corrected. Often, difficulty in steering is a matter of lubrication that an authorized

Axis dealer can perform. Never ignore any steering issues, regardless of timing for

the annual maintenance check-up.

As with the steering, never ignore suspicious issues with the shifter/throttle.

Anytime the lever does not move smoothly or the boat does not shift/accelerate/

decelerate with ease and smoothness, it is a matter to be resolved by an authorized

Axis dealer. Do not wait for the annual maintenance period to verify safe operations.

steering

system

shift

and throttle

system

exhaust

flaps

Содержание A20

























































































































































































































Результаты поиска

Содержание A20

Отзывы:

Похожие инструкции для A20

Бренды по названию

Популярные бренды

Axis A20, Руководство пользователя

Результаты поиска

Содержание A20

Отзывы:

Похожие инструкции для A20

Бренды по названию

Популярные бренды