Axis A20 Скачать руководство пользователя страница 131

Страница: 131 / 216

couple of turns of strap on the winch.

• The boat should be partially loaded on the partially submerged trailer by engine power. More

on this technique is explained later in this Owner’s Manual. Using the winch as the sole meth

od for loading puts undue strain on the winch strap and results in excessive wear.

• Check the straps prior to each loading. The straps will wear with age, use and exposure to the

elements. Because of the importance in holding the boat secure for loading, unloading and

towing, never use worn straps. Replace with Axis-approved straps only.

• As part of the maintenance program, the gears should be greased with a heavy-duty, ma-

rine-grade grease regularly. This allows for continued proper operation and will help in the

ease of operating the handle as well.

• Attach the winch to the bow eye on the boat for loading. The winch should

NEVER

be at-

tached to any other component of the boat.

Attaching the winch to any other component of the boat other than the

bow eye, and attempting to load the boat can result in damage to the

boat. This is not covered under warranty.

• Do not rely on the winch to be the only manner in which the boat is held on the trailer. Use all

other tie-downs as described elsewhere in this Owner’s Manual. The winch is insufficient to

hold the boat in place.

As part of the security for towing, the boat is equipped with tie-downs fore

and aft (optional on trailers) on the boat and on the trailer. Seek assistance from

an authorized Malibu (Axis) Trailer dealer to determine the location on your boat

model and trailer as they vary. Also seek instruction for the proper way in which

to tie or hitch the lines for both a secured boat and ease of unlatching the hitches

when you arrive at your destination.

trailer components
and how they function

The trailer is equipped with a trailer jack, which serves several purposes.

The trailer jack can hold and lift the trailer to position for lowering on the hitch

ball of the tow vehicle. It is also useful for assisting and balancing as a trailer rests

free of the tow vehicle or is moved.

Rotate the trailer jack so that it is vertical, and snap the locking pin before

placing any kind of load on the trailer jack. Always retract and rotate back into the

horizontal position for stowing or towing.

Axis

Owners

Manual

2019

Page 120

tie-downs

trailer

jack

Содержание A20

























































































































































































































Результаты поиска

Содержание A20

Отзывы:

Похожие инструкции для A20

Бренды по названию

Популярные бренды

Axis A20, Руководство пользователя

Результаты поиска

Содержание A20

Отзывы:

Похожие инструкции для A20

Бренды по названию

Популярные бренды