Axis A20 Скачать руководство пользователя страница 79

Страница: 79 / 216

Left Bank of Buttons and Stereo

Blower System:

Press this button once to turn the blower system ON; press again to turn the

system OFF. The LED in the button will light when the blower system is ON.

Always operate the blower for several minutes prior to starting the

engine, running at a low speed or at idle. This must be done with the

engine compartment open. Failure to perform this necessary function

could result in an explosion of the accumulated fumes within the compartment, leading to serious injury

or death.

The blower system vents carbon monoxide, a naturally occurring by-product of the engine and

drive train operation, through the exhaust manifold, muffler, exhaust lines and flap that combine

to remove dangerous carbon monoxide and other naturally occurring toxic by-products from the

engine and drive train operation. The emissions primarily are eliminated through the exhaust

flap located beneath the swim platform. Although much of the exhaust is disbursed into and

through the water, fumes still reach the swim platform and transom area of the boat, including

the sun pads. Therefore, no one should ever be on the swim platform, transom or sun pads when

the engine is operating. See the

Safety

section of this Owner’s Manual for more detail.

Never operate the boat if you or anyone on board suspects that the exhaust or fuel

system is not performing as designed.

Read the

Blower System

information in the

How It Works

section and all of the

Safety

section

in this Owner’s Manual. Important information is included in those sections regarding proper

operation and safety considerations for the Blower System in addition to the operational

information provided here.

Bilge System:

Press the button once to

manually

turn the bilge pumping system ON. (The

boat is equipped with an automatic control that is explained in the How It Works section of this

Owner’s Manual.) The LED will light up when the bilge system is working. Press the button again

Axis

Owners

Manual

2019

Page 70

accessory buttons

Содержание A20

























































































































































































































Результаты поиска

Содержание A20

Отзывы:

Похожие инструкции для A20

Бренды по названию

Популярные бренды

Axis A20, Руководство пользователя

Результаты поиска

Содержание A20

Отзывы:

Похожие инструкции для A20

Бренды по названию

Популярные бренды