Axis A20 Скачать руководство пользователя страница 34

Страница: 34 / 216

on-product warning
labels concerns

Warning labels are placed at specific locations on your Axis boat at the time of manufacture

to alert you to potential hazards that may not be obvious. These labels also indicate how to

avoid these hazards. Warning labels should never be removed and must remain

legible. If you suspect a label is missing, or if a label becomes damaged or

becomes unreadable (damaged, faded, or sun bleached), contact your dealer for

replacement.

It is the responsibility of the boat owner and occupants of the boat to

understand and comply with all warning labels and safety recommendations/

requirements. The driver of the boat and the boat owner are responsible for

the proper operation of the boat and the safety of the occupants of the boat.

Failure to adhere to and comply with the on-product warning labels and safety

statements labeled as dangers, warnings, and cautions that appear in this

manual can lead to serious injury, or death, as well as property damage.

READ

AND ADHERE TO ALL WARNING PLATES AND LABELS

from bow to stern, including

those that are installed inside the engine compartment, lockers, and underneath

seating.

warning

labels

and

locations

Axis

Owners

Manual

2019

Page 25

Содержание A20

























































































































































































































Результаты поиска

Содержание A20

Отзывы:

Бренды по названию

Популярные бренды

Axis A20, Руководство пользователя

Результаты поиска

Содержание A20

Отзывы:

Бренды по названию

Популярные бренды