Axis A20 Скачать руководство пользователя страница 121

Страница: 121 / 216

Boats that will be operated in salt water—or brackish fresh water—require

several alterations to ensure that they will continue to operate properly. While care

and maintenance are critical for all boats, those that are run in salt water require

even more attention to detail.

Salt or polluted fresh water can quickly damage the boat, including corrosion

that can result in the serious threat to the well-being of boaters.

Boats that have been operated in polluted fresh water or

in salt water should be thoroughly rinsed with clean, fresh

water after an outing. The corrosive properties of this

type of water can cause damage that is not covered under

warranty. Hardware that is damaged by brackish or salt water can eventually fail, which

could cause malfunction of the hardware, even hardware chosen for its anti-corrosive

properties, and/or the components that are held in place by the hardware, which could result in serious

injury or death to persons on-board.

Axis

Owners

Manual

2019

Page 110

salt

water

series

Содержание A20

























































































































































































































Результаты поиска

Содержание A20

Отзывы:

Axis A20, Руководство пользователя, Страница: 121 / 216

Результаты поиска

Содержание A20

Отзывы: