Axis A20 Скачать руководство пользователя страница 129

Страница: 129 / 216

When using a second person to

assist in the backing up process to

hitch the trailer to the tow vehicle,

always watch in your mirror. Do

not allow the person to stand between the tow vehicle and the trailer

as they can be struck by the vehicle or caught between the tow vehi-

cle and the trailer. Such activity requires common sense and care to

avoid injury.

Never move the trailer toward the

tow vehicle. When the trailer is not

fully hitched up, the brakes are not

operational.

• Release the coupler latch. The hitch pin should fit easily into

the hole. If it does not, this means that the latch is not com-

pletely closed. It will not close unless the coupler fits snugly

over a properly sized ball. If the hitch pin is damaged or lost,

it must be replaced prior to operating the rig.

The hitch pin must be properly

installed and secure prior to oper-

ation. If it is damaged or missing,

you can operate temporarily with a

one-quarter inch (1/4”) or five-six

teenths inch (5/16”) shank padlock. Never operate without the hitch

pin or padlock as the trailer and contents can become disengaged

from the tow vehicle, which may result in serious injury or death.

• Remove the hitch pin from the hole in the side of the coupler.

• On the standard Malibu (Axis) Trailer, push the button on the side.

(Other trailers do not have the button.)

• While holding the button, raise the handle.

• Place the coupler over the ball.

• Lower the coupler.

• Close the handle. An audible sound will be heard. If the handle does not close

easily, the ball is not fully within the socket.

DO NOT FORCE

the handle to close as

it is likely that the ball is the wrong size and should be replaced.

Axis

Owners

Manual

2019

Page 118

open

the

coupler

the

coupler

Содержание A20

























































































































































































































Результаты поиска

Содержание A20

Отзывы:

Axis A20, Руководство пользователя, Страница: 129 / 216

Результаты поиска

Содержание A20

Отзывы: