Axis A20 Скачать руководство пользователя страница 188

Страница: 188 / 216

grade hull paint on boats that are allowed to remain in bodies of water for extended periods

(more than 14 days);

• damages caused by vandalism or theft;

• corrosion or damage, including oxidation, electrolysis including that which occurs to chrome

plated, stainless, anodized or aluminum finish or the colorfastness of finish.

Failure to follow

the instructions within this Owner’s Manual regarding corrosion prevention and operation

in salt or brackish water may result in or contribute to these types of damage and are not

covered under the Limited Warranty;

• damages caused by aftermarket cleaning products or additives not specifically approved by

Malibu Boats;

• damages due to insufficient or improper maintenance, lack of maintenance, or delay of repair

(unless specifically and directly authorized by Malibu Boats warranty department in writing);

• damage or contamination resulting from leaking or spilled fluids including, but not limited to,

fuel or drive train fluids;

• conditions resulting from use of the boat for anything other than recreational purposes (Note:

Commercial use as described in this owner’s manual will affect the length of warranty coverage.

Please refer to

Section 5: Commercial Use Exclusions / Restrictions

for specific details);

• manufacturing variations or imperfections in cosmetic, convenience or aesthetic components

or features of the boat, including the gel coat finish, which have no effect on use or safety;

• damages caused by the use of any trailer purchased through any entity other than Axis Boats;

• damages caused by improper support of the boat on davits, hoist system or boat lift of any kind;

• damages caused by improper weight distribution or excessive weight combinations of

persons aboard, ballast or simulated ballast and gear;

• any material, component or part of the boat that has a warranty period and/or conditions

as specified by the producing entity which differs from this Limited Warranty unless such

warranties are administered directly by the producing entity;

• damages caused by water intrusion into any part of the boat (including, but not limited to, the

glove box and various storage compartments);

• performance characteristics, such as speed, acceleration, fuel or oil consumption, etc., as

they are estimated and can vary as dictated by individual conditions;

• any and all consequential damages including, but not limited to, costs incurred for haul-out,

launching, towing, storage charges, telephone, expedited shipping of replacement parts, or

rental charges of any type (including slip fees), inconveniences, or loss of time or income;

• components such as Surf Gate™, fins and wedges not installed at the time of manufacture.

Post-manufacture installation of any of these items, as well as any other component not

installed at the time of manufacture, will void the warranty and other components of the

boat that have their own warranty(ies) due to potential damage to the boat and possible

danger to occupants;

• damage or injury resulting from failure to comply with recall notices, service bulletins and

advisories, or requests from Axis Boats to repair the boat or its components;

• damage or injury resulting from speeding, demonstration or any type of racing;

• damages resulting from the failure to properly maintain and care for the boat and its

components in accordance with the instructions found within this Owner’s Manual;

• shop supplies used in correction work, such as, but not limited to, sealants, lubricants,

cleaning supplies;

• minor adjustments to the drive train, such as, but not limited to, investigation of components, clean

or adjusting spark plugs, verification of fluid levels and lubricants, controls for the drive train;

• damage to water pump impellers, or any component of the cooling system that Malibu Boats

determines at its sole discretion could have been avoided either through reasonable boating

operation and practices or by maintenance as required and directed in this Owner’s Manual;

• damage to the engine starter motor or other assemblies and components determined by

Malibu Boats at its sole discretion are the result of excessive attempts to start the engine, or

by condensation/submersion of these and similar components;

• damage resulting from water intrusion in the intake or exhaust system;

• damage resulting from the use of lubricants, gasoline, or other fluids other than those

specified in this Owner’s Manual or by subsequent approval by Axis Boats following

publication of this Owner’s Manual;

Axis

Owners

Manual

2019

Page 177

Содержание A20

























































































































































































































Результаты поиска

Содержание A20

Отзывы:

Бренды по названию

Популярные бренды

Axis A20, Руководство пользователя

Результаты поиска

Содержание A20

Отзывы:

Бренды по названию

Популярные бренды