Axis A20 Скачать руководство пользователя страница 20

Страница: 20 / 216

If your boat will be operated by a minor, remember to have an adult present

at all times. Many states have laws regarding minimum age and licensing

requirements for minors.

Some states require boat training courses, certification, or licensing for

minors and/or adults. Contact state and local authorities for requirements that

apply in your area.

safety and
required equipment

Your boat and equipment must be in compliance with federal, state and local safety

equipment regulations. USCG regulations require certain safety equipment be present on your

boat during operation. For a detailed description, obtain “Federal Requirements for Recreational

Boats” published by the U.S. Coast Guard and available online at:

http://www.uscgboating.org/images/420.PDF

In addition to the USCG regulations, other local and/or international law enforcement

agencies may have similar requirements. You should check with your local marine law

enforcement agency regarding any such requirements before boating.

Equipment requirements for coastal and inland waters differ. Check with local authorities

and/or the USCG for further information about coastal water requirements.

The Federal Boat Safety Act of 1971 (FBSA/71) and the National Recreation Boating Safety

Program have established minimum safety standards for boats and associated equipment,

specified by the USCG. In addition, the American Boat and Yacht Council (ABYC) and the National

Marine Manufacturers Association (NMMA) work with boat builders to develop voluntary

standards that exceed the USCG requirements. The included safety equipment on your boat

meets or exceeds the standards of the USCG, ABYC and the NMMA.

Some required safety equipment, such as life jackets (PFDs), are not included with your boat.

Your dealer can help you choose the appropriate equipment.

Many states’ equipment requirements go beyond USCG requirements.

Contact your state boating office for further information.

Axis

Owners

Manual

2019

Page 11

operation

minors

and

licensing

Содержание A20

























































































































































































































Результаты поиска

Содержание A20

Отзывы:

Бренды по названию

Популярные бренды

Axis A20, Руководство пользователя

Результаты поиска

Содержание A20

Отзывы:

Бренды по названию

Популярные бренды