manualshive.com logo in svg

AXIOMATIC AX030541, Руководство пользователя, Страница: 114 / 117

Поделиться
Скачать
AXIOMATIC AX030541 Скачать руководство пользователя страница 114

 

 
User Manual UMAX030541. Version V1                                                                                                              114-116 

4 

Technical Specifications 

 

Technical Specifications:   

Specifications are indicative and subject to change. Actual performance will vary depending on the application and operating conditions. Users 
should satisfy themselves that the product is suitable for use in the intended application. All our products carry a limited warranty against defects in 
material and workmanship.  Please refer to our Warranty, Application Approvals/Limitations and Return Materials Process as described on 

www.axiomatic.com/service.html

.  

 

Input Specifications 

Power Supply Input - Nominal  

12V, 24V or 48Vdc nominal (9

…60 Vdc power supply range) 

Surge and Reverse Polarity 
Protection 

Surge and reverse polarity protections are provided. 

Voltage Protections 

Under and overvoltage protections are provided. Hardware shutdown is at 75V. 

Input 

CANopen® (model AX030541) 
The CAN signal can be filtered to accept messages from a single address on the 
network permitting a link to a specific ECU.  

 
 

Output Specifications 

CAN  

The controller can send a single frame application specific CAN message to the 
network continuously or on request.  Using the EA, the user can configure this 
feature. 

Signal Outputs 

Up to 4 signal outputs are selectable by the user. Refer to Table 1.0.

 

Ground Connection 

3 Analog GND connections are provided. They are connected together internally. 

Protection for  Terminal 

Fully protected against short circuit to ground and short circuit to power supply rail. 
Unit will fail safe in the case of a short circuit condition, self-recovering when the 
short is removed. 

Table 1.0 - Outputs 

Analog Outputs 

Up to 4 signal outputs are available. 

 

•

  the output mode (voltage, current or digital); 

 

➢

 

the minimum and maximum values for the output signal from the 
+/-10V or +/-20 mA range   

➢

 

standard analog voltage signal ranges, including: 0-5V; 0-10V; +/-
5V; +/-10V with maximum 25mA  load 

➢

 

Analog current signal ranges, including: 0-20mA; 4-20 mA; and 
+/-20mA with maximum 

500Ω load 

➢

 

PWM outputs, including: PWM 0-100% D.C.; and Frequency 
0.05-30 kHz (5V or 12V Amplitude, maximum 40mA load) 

 

 

The outputs can be globally enabled or disabled. 

Output Accuracy 

Voltage, Current: 0.2% preliminary 
PWM: 0.1% preliminary 

Output Resolution 

0-0.0001% (>12 bit) 

 

 

General Specifications 

Microprocessor 

STM32F405, 32-bit, 1024 KByte flash program memory 

Isolation 

300 Vrms 
Galvanic isolation between the power supply input and the analog signal outputs and the CAN 
circuit. 

Control Logic 

Standard embedded software is provided.   
(Application-specific control logic or factory programmed setpoints are available on request.) 

Monitoring and Troubleshooting 

The controller can also transmit a CAN application message carrying signals 
internally generated by the controller. This feature can be used for monitoring 
and debugging purposes. 

CAN 

1 CAN port (CANopen®) 

User Interface (PC-based) 

EDS File 
Download from axiomatic.com log-in page. Contact 

[email protected]

 for the 

password.

 

Software Reflashing 

PC-based Axiomatic Electronic Assistant, AX070502. 

Quiescent Current Draw 

107 mA @ 12V and full load

 

52 mA @ 24V and full load

 

32 mA @ 48V and full load

 

Response Time 

<10 mSec. max. 

Weight 

0.55 lb. (0.249 kg) 

Operating Conditions 

-40 to 85 

C (-40 to 185 

F) 

Storage Temperature 

-55 to 125 

C (-67 to 257

F) 

Compliance 

CE marking 

Содержание AX030541






















































































































Отзывы:

Нет отзывов