Cubola
®
Solidare
®
EN 20-04-2018
27
Installation Cubola
®
Solidare
®
28.
Place the cord tensioner in the front profile and fasten it by turning the PVC guide blocks with a
screwdriver.
Tension the system, turning in the direction as shown on the cord tensioner.
Note: Every spring may be stretched to a maximum of 60% of its own length.
29.
Let the fabric run in and out a couple of times to check the correct functioning.
30.
Also check that the springs are not stretched too far.
31.
Hook the cover onto the front profile and click it.
32.
Hook the optional gutter onto the side guide and fasten it with self-drilling screws .
33.
Screw (for Solidare Pergola awnings larger than 4,0 meter) the top cover extension on the top cover
with self-drilling screw 4,2x13 mm. Install the top cover and fasten it with self-drilling screw 4,2x13
mm and click the caps.
34.
Hook the top cover extension with bristle onto the top cover and fasten it on the outside in the side
guide with self-drilling screw 4,2x25 mm and click the caps.
