Cubola
®
Solidare
®
EN 20-04-2018
25
Installation Cubola
®
Solidare
®
9.
Slide the fitted corner assembly to the mounted wall bracket. When doing so, ensure that the control
cable is drawn out through the opening in the wall bracket
10.
Fasten the support beam to the top using the 3 bolts. Fasten the other bolt when the cassette is
placed on the system.
11.
Don't yet fasten on the adjusting plate side.
12.
Place the front beam between the 2 placed corners.
13.
Feed the motor cable through the hole in the leg.
14.
Fasten the front beam with the M8x35 bolts. When doing so, keep the profiles closely together at the
front.
15.
Fasten a control plug to the motor cable. Connect the control plug and let it drop into the leg.
16.
Measure the system diagonally, move the concrete base if necessary to achieve the perfect position.
Also set the exact height of the adjusting plate.
17.
Fasten the adjusting plate to the concrete base.
18.
Install the cover on the legs.
19.
Install the cassette unit between the beams and fasten the inner bolt in the beam. Tilt the cassette
and fasten the bracket on the wall plate with plate screw M6x12.
20.
Tilt the cover forward and mark the holes. Drill holes for fasteners. Ask your supplier for advice. Fasten
the screws in the wall.
