Cubola
®
Solidare
®
EN 20-04-2018
24
Installation Cubola
®
Solidare
®
Installation wall-mounted
Cubola
®
Solidare
®
Decide before placing the Cubola Solidare
whether the existing building is suitable to install the Cubola
Solidare
system (have it judged by an architect). Ensure adequate mounting material for the combination
wall and Cubola Solidare.
1.
Screw the wall mounting plate to the corner profile. The distance between the wall mounting plate
and the first hole with screw-thread is then 50 mm.
2.
Measure the positions of the wall mounting bracket on the wall. Drill holes for fasteners. Ask your
supplier for advice (in the wall supports is space for 3x M12 bolts (opening 14 mm).
3.
Attach the wall brackets to the wall and ensure that the brackets are level with one another. Limited
correction of the position is possible by sliding the brackets in the length holes.
The bottom of the wall plate is equal to the height of the bottom of the beams
.
4.
Measure the positions of the legs on the floor. Various means of floor mounting are possible,
depending on the situation. For example: on concrete pads, foundation or existing floor.
5.
Fasten 2 wall mounting beams to the legs to create a corner structure.
6.
Ensure that one of the corners is fitted with a control cable for the valance system. Feed the cable
through the beam.
7.
Connect the leg to the beam from the inside using M8x35 bolts.
8.
Connect a control plug to the cable on the leg side.
