Avocent MergePoint Unity, Инструкция по установке и эксплуатации

Страница: 50 / 97

Launching a Session
NOTE: When using a non-proxied connection, video performance over a slower network connection may be less
than optimal. Since certain color settings (such as Grayscale) use less network bandwidth than others (such as Best
Color), changing the color settings can increase video performance. For optimal video performance over a slower
network connection, Avocent recommends a color setting such as Grayscale/Best Compression or Low Color/High
Compression. See
Adjusting the View on page 43 for more information.
NOTE: If a user connects to a target device with a higher screen resolution than the local computer, the Video
Viewer window will display a portion of the target device screen, with scroll bars for viewing the remainder of the
screen. The user may view the entire screen by adjusting the resolution on the target device, the local computer or
both.
To launch a KVM session from the MergePoint Unity Explorer window:
1. Click on a device listed on the Target Devices screen to open the unit overview window.
2. Click the KVM Session link to open the Video Viewer in a new window.
Session time-out
A remote session can time-out when no activity occurs in a Session window for a specified
time. The session time-out value can be configured in the Appliance KVM Session Settings
window. The specified time-out value will be used the next time the switch OBWI is accessed.
To enable, disable or configure the session time-out:
1. In the side menu, select Unit View - Appliance - Appliance Settings - Sessions - General .
2. Select the desired setting for the Enable Activity Timeout box.
3. If necessary, select the time limit for the inactivity time-out.
4. Click Save .
Window Size
NOTE: The View - Scaling command is not available if the Video Viewer window is in Full Screen mode or to non-
primary users of a shared session.
When the MergePoint Unity switch OBWI is used for the first time, any open Video Viewer
windows display at a resolution of 1024 x 768 until the user changes the value. Each Video
Viewer window can be set to a different resolution.
The MergePoint Unity switch OBWI automatically adjusts the display if the window size
changes during a session as long as autoscaling is enabled. If the target device resolution
changes any time during a session, the display adjusts automatically.
42 MergePoint Unity® Switch Installer/User Guide