Avocent MergePoint Unity, Инструкция по установке и эксплуатации

Страница: 80 / 97

2. When the Terminal Applications menu appears, press
Page Down
to view the Macro
Configuration screen. The Macro Configuration screen shows the ten available macros and
the associated key sequences, if any, for each.
3. Use the Up Arrow and Down Arrow keys to scroll to an available macro number and
highlight the listed keystroke sequence. Type the new macro keystroke sequence over the
default. Any combination of Ctrl or Alt and a single key may be used. When you have
finished entering the keystroke sequence that will activate the new macro, press the
Down
Arrow
key.
4. On the line below the macro keystroke sequence you just entered, type the keystroke
sequence that you wish the macro to perform.
5. Repeat steps 3 and 4 to configure additional macros.
6. When finished, press
Enter
to return to the previous screen.
Using History mode
History mode allows you to examine the contents of the history buffer, which contains the
events that have occurred.
The DSRIQ-SRL module maintains a buffer containing 240 lines minimum, or 10 screens, of
output. When the history buffer is full, it will add new lines at the bottom of the buffer and
delete the oldest lines at the top of the buffer.
NOTE: The Config Key Sequence, On-Line Key Sequence and Clear History Key Sequence used in the following
procedure are the default values. These key combinations can be changed using the Terminal Applications menu.
To use History mode:
1. Press
Ctrl-F9
. The mode will display as History.
2. Press one of the following key combinations to perform the indicated action:
• Home: Move to the top of the buffer.
• End: Move to the bottom of the buffer.
• Page Up: Move up one buffer page.
• Page Down: Move down one buffer page.
• Up Arrow: Move up one buffer line.
• Down Arrow: Move down one buffer line.
• Ctrl-F8: Enters Configuration mode. The Configuration screen will appear.
72 MergePoint Unity® Switch Installer/User Guide